https://myjohndeereexcavator.com Mon, 06 Jul 2026 20:27:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://myjohndeereexcavator.com/40mm-mini-excavator-bucket-pin-for-caterpillar-john-deere-kubota-attachment/ https://myjohndeereexcavator.com/40mm-mini-excavator-bucket-pin-for-caterpillar-john-deere-kubota-attachment/#comments Thu, 02 Jul 2026 12:13:39 +0000 https://myjohndeereexcavator.com/40mm-mini-excavator-bucket-pin-for-caterpillar-john-deere-kubota-attachment/ Continue reading →

]]>


This is a 40mm coupler pins. Listing includes 1 pieces total. 180MM 225MM 250MM 255MM 280MM 300MM 320MM 330MM. Made of 4140 alloy steel. Non chrome plated for use with coupler. This is a Brand New BUCKET PIN 40MM FOR BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU BACKHOES & EXCAVATORS. PIN DIMENSION – DIAMETER 40 MM. The Pins are made with High Quality 40Cr Steel with a surface hardness of HRC= 52 to have the proper ratio between wear strength and flexibility. This part may fit various other BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU HITACHI KOBELCO Models. Please check suitability for your machine by consulting your service manual. Please ensure you measure your pin prior to purchasing. This is a high quality part made to OEM standards.

]]> https://myjohndeereexcavator.com/40mm-mini-excavator-bucket-pin-for-caterpillar-john-deere-kubota-attachment/feed/ 0 https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/ https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/#comments Wed, 20 May 2026 03:15:48 +0000 https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/ Continue reading →

]]>


This is a 40mm coupler pins. Listing includes 1 pieces total. 180MM 225MM 250MM 255MM 280MM 300MM 320MM 330MM. Made of 4140 alloy steel. Non chrome plated for use with coupler. This is a Brand New BUCKET PIN 40MM FOR BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU BACKHOES & EXCAVATORS. PIN DIMENSION – DIAMETER 40 MM. The Pins are made with High Quality 40Cr Steel with a surface hardness of HRC= 52 to have the proper ratio between wear strength and flexibility. This part may fit various other BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU HITACHI KOBELCO Models. Please check suitability for your machine by consulting your service manual. Please ensure you measure your pin prior to purchasing. This is a high quality part made to OEM standards. This places you in an advantageous position as you are getting an OEM spec product at aftermarket prices. Why pay 50% over for a branded box. Most times this is nominal and should not be a deterrent to you. OEM Part Numbers mentioned on listing are for reference purposes only. We do not imply that any part is a product of KOMATSU, CAT, JCB, VOLVO, HITACHI KOBELCO unless specifically listed as Genuine in the listing title.

]]> https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/feed/ 0 https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/ https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/#comments Wed, 07 Jan 2026 22:57:47 +0000 https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/ Continue reading →

]]>







The 4-piece set of 45MM excavator bucket bushings bosses is designed to fit compatible equipment types such as excavators from manufacturers like John Deere, Takeuchi, and Kubota. Specifically intended as replacement parts for bucket bushings, these components help to maintain the functionality and performance of heavy equipment. The set includes four bushings that are essential for ensuring smooth operations and durability in excavator bucket systems. Ideal for businesses and industrial applications, these high-quality bushings are a reliable choice for maintaining and repairing heavy equipment machinery.

]]> https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/feed/ 0 https://myjohndeereexcavator.com/john-deere-30-35-size-mini-excavator-manual-wedge-coupler-complete-40mm-pins/ https://myjohndeereexcavator.com/john-deere-30-35-size-mini-excavator-manual-wedge-coupler-complete-40mm-pins/#comments Wed, 10 Dec 2025 13:21:41 +0000 https://myjohndeereexcavator.com/john-deere-30-35-size-mini-excavator-manual-wedge-coupler-complete-40mm-pins/ Continue reading →

]]>





This John Deere 30/35 size mini excavator manual wedge coupler is a complete set with 40mm pins and roll pins. It is compatible with John Deere and Hitachi equipment and weighs 47lbs. The unit quantity is one and it is suitable for excavator equipment. The brand is John Deere and the coupler type is quick attach. The hours and country/region of manufacture are unknown. This heavy equipment attachment falls under the categories of Business & Industrial, Heavy Equipment, Parts & Attachments, and Heavy Equipment Attachments. This item is a new take off, complete with everything pictured. 40mm pins and orange. Feedback is given once received.

]]> https://myjohndeereexcavator.com/john-deere-30-35-size-mini-excavator-manual-wedge-coupler-complete-40mm-pins/feed/ 0 https://myjohndeereexcavator.com/4pc-bushing-4430457-for-john-deere-excavator-27d-35d-35g-50d-50g4555-40mm/ https://myjohndeereexcavator.com/4pc-bushing-4430457-for-john-deere-excavator-27d-35d-35g-50d-50g4555-40mm/#comments Thu, 11 Apr 2024 02:49:34 +0000 https://myjohndeereexcavator.com/4pc-bushing-4430457-for-john-deere-excavator-27d-35d-35g-50d-50g4555-40mm/ Continue reading →

]]>





4PC Bushing 4430457 For John Deere Excavator 27D 35D 35G 50D 50G(4555 40mm). For John Deere Excavator 27D 35D 35G 50D 50G 60D 60G For Hitachi Excavator EX40UR-3, ZX30UR, ZX35U-A, ZX40U, ZX40U-3, ZX40U-3U, ZX40U-5A, ZX40UR, ZX48U-3, ZX48U-3F, ZX48U-5A, ZX50U, ZX50U-2, ZX50U-3, ZX50U-3F, ZX50U-5A, ZX52U-3, ZX52U-3F. Package Include:BUSHING, BEARING SLEEVE 4. Note:This is an aftermarket replacement part. Please compare its appearance, shape and size with your original unit and make sure that it can fit your machine before ordering. Orders are processed Monday thru Friday, excluding legal holidays. We hope you understand that the processing time of legal holidays will be delayed. Our existing products, including machinery, automobile and other accessories, are still in the development stage.

]]> https://myjohndeereexcavator.com/4pc-bushing-4430457-for-john-deere-excavator-27d-35d-35g-50d-50g4555-40mm/feed/ 0 https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-welded-cylinder-cat-303-304-case-yanmar/ https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-welded-cylinder-cat-303-304-case-yanmar/#comments Fri, 17 Mar 2023 06:24:10 +0000 https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-welded-cylinder-cat-303-304-case-yanmar/ Continue reading →

]]>











CALL WITH ANY QUESTIONS 8OO 564 72O6. Dont miss out, they sell fast. Below is a video of our thumb installed on a TB 135, easy to do and works great, the only welding you need to do is the upper eyelit. Measures 9 3/8 between the ears, ear is offset so it will fit over the bucket and share the pin. The large offset ear piece now comes loose, so you can put it on left or right inside of the thumb. Leave loose, or weld it. This setup comes with thumb, upper weld on eyelit, longer 1 9/16 bucket pin, and cylinder, you will need your own hoses. The cylinder is 2″ with a 14″ stroke 2500 PSI welded cylinder. These are factory built in the USA, CNC cut from 3/4 thick steel, and precison welded, view weld close up. They are all new, and unused, cylinder is black, thumb will come unpainted so you can paint it your color of choice. There is no grease fitting on pin, it is a solid pin. Please take a minute to check out my other auctions. Visit my about me page. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Buckets”. The seller is “shaverbro” and is located in this country: US. This item can be shipped to United States, Canada.

• Brand: Unbranded
• Compatible Equipment Type: Excavator
• Compatible Equipment Make: Takeuchi, Universal, CAT, Case, Doosan, Gehl, Hitachi, Hyundai, IHI, John Deere, Kobelco, Komatsu, Kubota, Link-Belt, Mustang, New Holland, Terex, Vermeer, Volvo, Yanmar
• Equipment Type: Excavator

]]> https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-welded-cylinder-cat-303-304-case-yanmar/feed/ 0 https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-34/ https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-34/#comments Tue, 11 May 2021 02:04:11 +0000 http://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-34/ Continue reading →

]]>










Dont miss out, they sell fast. Below is a video of our thumb installed on a TB 135, easy to do and works great, the only welding you need to do is the upper eyelit. Measures 10 5/8 between the ears, so it will fit over the bucket and share the pin. The large offset ear piece now comes loose, so you can put it on left or right inside of the thumb, or cut it down for narrower ear widths. Leave loose, or weld it, or cut it to the right size to use as a spacer. This setup comes with thumb, upper weld on eyelit, longer 1 9/16 bucket pin, and cylinder, you will need your own hoses. The cylinder is 2″ with a 14″ stroke 2500 PSI. These are factory built in the USA, CNC cut from 3/4 thick steel, and precison welded, view weld close up. They are all new, and unused, cylinder is black, thumb will come unpainted so you can paint it your color of choice. There is no grease fitting on pin, it is a solid pin. Please take a minute to check out my other auctions. Visit my about me page. The item “NEW 40MM MINI EXCAVATOR HYDRAULIC THUMB JOHN DEERE Takeuchi Cat 303 IHI 35″ is in sale since Friday, April 30, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Buckets”. The seller is “shaverbro” and is located in Auburn, New York. This item can be shipped to United States, Canada.

• Model: 1
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Compatible Equipment Make: Takeuchi
• Non-Domestic Product: No
• MPN: Does Not Apply
• Brand: Unbranded
• Equipment Type: Excavator
• Compatible Equipment Type: Excavator

]]> https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-34/feed/ 0 https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-33/ https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-33/#comments Sun, 10 Jan 2021 13:33:24 +0000 http://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-33/ Continue reading →

]]>










Dont miss out, they sell fast. Below is a video of our thumb installed on a TB 135, easy to do and works great, the only welding you need to do is the upper eyelit. Measures 10 3/8 between the ears, ears are offset so it will fit over the bucket and share the pin. The large offset ear piece now comes loose, so you can put it on left or right inside of the thumb. Leave loose, or weld it, or cut it to the right size to use as a spacer. This setup comes with thumb, upper weld on eyelit, longer 1 9/16 bucket pin, and cylinder, you will need your own hoses. The cylinder is 2″ with a 14″ stroke 2500 PSI. These are factory built in the USA, CNC cut from 3/4 thick steel, and precison welded, view weld close up. They are all new, and unused, cylinder is black, thumb will come unpainted so you can paint it your color of choice. There is no grease fitting on pin, it is a solid pin. Please take a minute to check out my other auctions. Visit my about me page. The item “NEW 40MM MINI EXCAVATOR HYDRAULIC THUMB JOHN DEERE Takeuchi Cat 303 IHI 35″ is in sale since Wednesday, January 6, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Buckets”. The seller is “shaverbro” and is located in Auburn, New York. This item can be shipped worldwide.

• Brand: Unbranded
• Custom Bundle: No
• Non-Domestic Product: No
• Model: 1
• Modified Item: No
• Equipment Type: Excavator
• Country/Region of Manufacture: United States
• Compatible Equipment Type: Excavator
• Compatible Equipment Make: Takeuchi
• MPN: Does Not Apply

]]> https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-33/feed/ 0 https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-32/ https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-32/#comments Sun, 06 Dec 2020 02:56:51 +0000 http://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-32/ Continue reading →

]]>










Dont miss out, they sell fast. Below is a video of our thumb installed on a TB 135, easy to do and works great, the only welding you need to do is the upper eyelit. Measures 10 3/8 between the ears, ears are offset so it will fit over the bucket and share the pin. The large offset ear piece now comes loose, so you can put it on left or right inside of the thumb. Leave loose, or weld it, or cut it to the right size to use as a spacer. This setup comes with thumb, upper weld on eyelit, longer 1 9/16 bucket pin, and cylinder, you will need your own hoses. The cylinder is 2″ with a 14″ stroke 2500 PSI. These are factory built in the USA, CNC cut from 3/4 thick steel, and precison welded, view weld close up. They are all new, and unused, cylinder is black, thumb will come unpainted so you can paint it your color of choice. There is no grease fitting on pin, it is a solid pin. Please take a minute to check out my other auctions. Visit my about me page. The item “NEW 40MM MINI EXCAVATOR HYDRAULIC THUMB JOHN DEERE Takeuchi Cat 303 IHI 35″ is in sale since Monday, November 23, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Buckets”. The seller is “shaverbro” and is located in Auburn, New York. This item can be shipped worldwide.

• Brand: Unbranded
• Custom Bundle: No
• Non-Domestic Product: No
• Model: 1
• Modified Item: No
• Equipment Type: Excavator
• Country/Region of Manufacture: United States
• Compatible Equipment Type: Excavator
• Compatible Equipment Make: Takeuchi
• MPN: Does Not Apply

]]> https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-32/feed/ 0 https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-31/ https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-31/#comments Sun, 18 Oct 2020 20:44:49 +0000 http://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-31/ Continue reading →

]]>










Dont miss out, they sell fast. Below is a video of our thumb installed on a TB 135, easy to do and works great, the only welding you need to do is the upper eyelit. Measures 10 3/8 between the ears, ears are offset so it will fit over the bucket and share the pin. The large offset ear piece now comes loose, so you can put it on left or right inside of the thumb. Leave loose, or weld it, or cut it to the right size to use as a spacer. This setup comes with thumb, upper weld on eyelit, longer 1 9/16 bucket pin, and cylinder, you will need your own hoses. The cylinder is 2″ with a 14″ stroke 2500 PSI. These are factory built in the USA, CNC cut from 3/4 thick steel, and precison welded, view weld close up. They are all new, and unused, cylinder is black, thumb will come unpainted so you can paint it your color of choice. There is no grease fitting on pin, it is a solid pin. Please take a minute to check out my other auctions. Visit my about me page. The item “NEW 40MM MINI EXCAVATOR HYDRAULIC THUMB JOHN DEERE Takeuchi Cat 303 IHI 35″ is in sale since Monday, September 14, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Buckets”. The seller is “shaverbro” and is located in Auburn, New York. This item can be shipped worldwide.

• Brand: Unbranded
• Custom Bundle: No
• Non-Domestic Product: No
• Model: 1
• Modified Item: No
• Equipment Type: Excavator
• Country/Region of Manufacture: United States
• Compatible Equipment Type: Excavator
• Compatible Equipment Make: Takeuchi
• MPN: Does Not Apply

]]> https://myjohndeereexcavator.com/new-40mm-mini-excavator-hydraulic-thumb-john-deere-takeuchi-cat-303-ihi-35-31/feed/ 0