https://myjohndeereexcavator.com Wed, 03 Jun 2026 20:07:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-30mm-for-case-case-ih-john-deere-kubota-40cr/ https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-30mm-for-case-case-ih-john-deere-kubota-40cr/#comments Wed, 20 May 2026 19:17:40 +0000 https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-30mm-for-case-case-ih-john-deere-kubota-40cr/ Continue reading →

]]>


This is a 30mm coupler pins. Listing includes 1 pieces total. 177MM 190MM 195MM 198MM 210MM 220MM 230MM 240MM 250MM 260MM 280MM 300MM. Length from center of hole to Shoulder. 152MM 165MM 170MM 175MM 185MM 195MM 205MM 215MM 225MM 235MM 255MM 275MM. Made of 4140 alloy steel. Non chrome plated for use with coupler. This is a Brand New BUCKET PIN 30MM FOR BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU BACKHOES & EXCAVATORS. PIN DIMENSION – DIAMETER 30 MM. The Pins are made with High Quality 40Cr Steel with a surface hardness of HRC= 52 to have the proper ratio between wear strength and flexibility. This part may fit various other BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU HITACHI KOBELCO Models. Please check suitability for your machine by consulting your service manual. Please ensure you measure your pin prior to purchasing. This is a high quality part made to OEM standards. This places you in an advantageous position as you are getting an OEM spec product at aftermarket prices. Why pay 50% over for a branded box. Most times this is nominal and should not be a deterrent to you. OEM Part Numbers mentioned on listing are for reference purposes only. We do not imply that any part is a product of KOMATSU, CAT, JCB, VOLVO, HITACHI KOBELCO unless specifically listed as Genuine in the listing title.

]]> https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-30mm-for-case-case-ih-john-deere-kubota-40cr/feed/ 0 https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/ https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/#comments Wed, 20 May 2026 03:15:48 +0000 https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/ Continue reading →

]]>


This is a 40mm coupler pins. Listing includes 1 pieces total. 180MM 225MM 250MM 255MM 280MM 300MM 320MM 330MM. Made of 4140 alloy steel. Non chrome plated for use with coupler. This is a Brand New BUCKET PIN 40MM FOR BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU BACKHOES & EXCAVATORS. PIN DIMENSION – DIAMETER 40 MM. The Pins are made with High Quality 40Cr Steel with a surface hardness of HRC= 52 to have the proper ratio between wear strength and flexibility. This part may fit various other BOBCAT CAT HIDROMEK JCB JOHN DEERE VOLVO FORD KOMATSU HITACHI KOBELCO Models. Please check suitability for your machine by consulting your service manual. Please ensure you measure your pin prior to purchasing. This is a high quality part made to OEM standards. This places you in an advantageous position as you are getting an OEM spec product at aftermarket prices. Why pay 50% over for a branded box. Most times this is nominal and should not be a deterrent to you. OEM Part Numbers mentioned on listing are for reference purposes only. We do not imply that any part is a product of KOMATSU, CAT, JCB, VOLVO, HITACHI KOBELCO unless specifically listed as Genuine in the listing title.

]]> https://myjohndeereexcavator.com/excavator-bucket-attachment-pin-40mm-for-case-case-ih-john-deere-kubota-40cr/feed/ 0 https://myjohndeereexcavator.com/new-universal-excavator-bucket-pin-for-case-komatsu-john-deere-kubota-40cr-steel/ https://myjohndeereexcavator.com/new-universal-excavator-bucket-pin-for-case-komatsu-john-deere-kubota-40cr-steel/#comments Wed, 25 Mar 2026 18:13:46 +0000 https://myjohndeereexcavator.com/new-universal-excavator-bucket-pin-for-case-komatsu-john-deere-kubota-40cr-steel/ Continue reading →

]]>












For CAT 336 345 349 25-1/2” Volvo John Deere. 1x Excavator Bucket Pin. For HK/TW buyers, please notify us your government ID #. For BRA, AR, PER buyers, please leave us your CPF#, CUIT# or RUC# correspondingly. Our guarantee is only for the cost of the item, we will not be responsible for any other expenses such as installation, labor, towing, repair or any other related expenses.

]]> https://myjohndeereexcavator.com/new-universal-excavator-bucket-pin-for-case-komatsu-john-deere-kubota-40cr-steel/feed/ 0 https://myjohndeereexcavator.com/excavator-bucket-pin-cat-oem-john-deere-kubota-case-110mm-4-3-x-698mm-27-5/ https://myjohndeereexcavator.com/excavator-bucket-pin-cat-oem-john-deere-kubota-case-110mm-4-3-x-698mm-27-5/#comments Thu, 08 Jan 2026 06:58:43 +0000 https://myjohndeereexcavator.com/excavator-bucket-pin-cat-oem-john-deere-kubota-case-110mm-4-3-x-698mm-27-5/





THANK YOU FOR YOUR INTEREST IN THIS ITEM.

]]> https://myjohndeereexcavator.com/excavator-bucket-pin-cat-oem-john-deere-kubota-case-110mm-4-3-x-698mm-27-5/feed/ 0 https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/ https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/#comments Wed, 07 Jan 2026 22:57:47 +0000 https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/ Continue reading →

]]>







The 4-piece set of 45MM excavator bucket bushings bosses is designed to fit compatible equipment types such as excavators from manufacturers like John Deere, Takeuchi, and Kubota. Specifically intended as replacement parts for bucket bushings, these components help to maintain the functionality and performance of heavy equipment. The set includes four bushings that are essential for ensuring smooth operations and durability in excavator bucket systems. Ideal for businesses and industrial applications, these high-quality bushings are a reliable choice for maintaining and repairing heavy equipment machinery.

]]> https://myjohndeereexcavator.com/4-piece-set-40mm-excavator-bucket-bushings-bosses-cat-john-deere-kubota-takeuchi/feed/ 0 https://myjohndeereexcavator.com/excavator-bucket-pins-80mm-x-543mm-40cr-steel-for-john-deere-caterpillar-kubota/ https://myjohndeereexcavator.com/excavator-bucket-pins-80mm-x-543mm-40cr-steel-for-john-deere-caterpillar-kubota/#comments Sat, 03 Jan 2026 14:36:47 +0000 https://myjohndeereexcavator.com/excavator-bucket-pins-80mm-x-543mm-40cr-steel-for-john-deere-caterpillar-kubota/ Continue reading →

]]>












Excavator Bucket Pins 80MM x 543MM 40CR Steel For John Deere Caterpillar Kubota. Even if you find your car model in the description list it might not be suitable because of the variaties of modifications. If you are not sure about part fitment please write us the VIN number Chassis No. Of your car and we will check if the part fits specifically your vehicle. For Caterpilla? Yanmar? Takeuchi? Kubota? John Deere? Case IH? Case. 320D 322C 320C 320B. (Please refer to compatibility chart for details). 1 PCS Excavator Bucket Pins 80MM x 543MM 40CR Steel (As the pictures shown). According to the factory specifications. 100% brand new and high quality guaranteed. Easy to use and to operate at affordable prices. Perfect cover that is useful, helpful and so practical. Because the country is different, may be different car models, product compatibility is for reference only. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 4 Please allow 0.5-1 inch difference due to manual measurement. We will provide you with the high quality service.

]]> https://myjohndeereexcavator.com/excavator-bucket-pins-80mm-x-543mm-40cr-steel-for-john-deere-caterpillar-kubota/feed/ 0 https://myjohndeereexcavator.com/cutting-the-grade-wilson-forest-lands-cat-d6-and-kubota-kx-040-4-excavator/ https://myjohndeereexcavator.com/cutting-the-grade-wilson-forest-lands-cat-d6-and-kubota-kx-040-4-excavator/#comments Wed, 19 Nov 2025 17:28:33 +0000 https://myjohndeereexcavator.com/cutting-the-grade-wilson-forest-lands-cat-d6-and-kubota-kx-040-4-excavator/ ]]> https://myjohndeereexcavator.com/cutting-the-grade-wilson-forest-lands-cat-d6-and-kubota-kx-040-4-excavator/feed/ 0 https://myjohndeereexcavator.com/filling-for-the-road-and-pad-with-the-kubota-kx-040-4-and-kx-080-4-excavator/ https://myjohndeereexcavator.com/filling-for-the-road-and-pad-with-the-kubota-kx-040-4-and-kx-080-4-excavator/#comments Wed, 29 Oct 2025 15:09:33 +0000 https://myjohndeereexcavator.com/filling-for-the-road-and-pad-with-the-kubota-kx-040-4-and-kx-080-4-excavator/ ]]> https://myjohndeereexcavator.com/filling-for-the-road-and-pad-with-the-kubota-kx-040-4-and-kx-080-4-excavator/feed/ 0 https://myjohndeereexcavator.com/hb4100-breaker-hammer-seal-kit-for-kubota-caterpillar-john-deere-excavator/ https://myjohndeereexcavator.com/hb4100-breaker-hammer-seal-kit-for-kubota-caterpillar-john-deere-excavator/#comments Mon, 16 Jun 2025 17:53:38 +0000 https://myjohndeereexcavator.com/hb4100-breaker-hammer-seal-kit-for-kubota-caterpillar-john-deere-excavator/ Continue reading →

]]>


HB4100 Breaker Hammer Seal Kit for Kubota Caterpillar John Deere Excavator. Part Name:Breaker Hammer Seal Kit. For Kubota Caterpillar Hitachi Komatsu John Deere Excavator. Q: What should I do if the part number matches the product description, but my vehicle or equipment is not listed in the “Compatible Models” list? A: Please provide your 17-digit VIN (Vehicle Identification Number) or equipment details brand, model, year, etc. We will use our database to verify compatibility and assist you in finding the correct part if needed. Q: What should I do if my vehicle or equipment matches the year, make, model, and engine code in the product description, but there is no matching part number? A: Please share your 17-digit VIN or equipment details, along with the part number you are interested in, via live chat or message. We will check our database and confirm whether the part is compatible with your vehicle or equipment as soon as possible. A: Yes, we often sell individual parts from kits separately. If you cannot find the specific part in our store, please send us your vehicle or equipment model and the list of parts you need. We will provide you with relevant links or options. We will work diligently to resolve the issue for you. We apologize for the inconvenience. We have several warehouses in the United States. Not less than 30 days. We greatly appreciate your. Please do NOT leave negative or neutral feedback without any contact. It’s very important to us, Thanks a lot!

]]> https://myjohndeereexcavator.com/hb4100-breaker-hammer-seal-kit-for-kubota-caterpillar-john-deere-excavator/feed/ 0 https://myjohndeereexcavator.com/h1xa-breaker-hammer-seal-kit-for-kubota-caterpillar-komatsu-john-deere-excavator-2/ https://myjohndeereexcavator.com/h1xa-breaker-hammer-seal-kit-for-kubota-caterpillar-komatsu-john-deere-excavator-2/#comments Sat, 24 May 2025 16:40:39 +0000 https://myjohndeereexcavator.com/h1xa-breaker-hammer-seal-kit-for-kubota-caterpillar-komatsu-john-deere-excavator-2/ Continue reading →

]]>


H1XA Breaker Hammer Seal Kit for Kubota Caterpillar Komatsu John Deere Excavator. Part Name:Breaker Hammer Seal Kit. Applications:for John Deere. For Kubota Caterpillar Hitachi Komatsu John Deere Excavator. Q: What should I do if the part number matches the product description, but my vehicle or equipment is not listed in the “Compatible Models” list? A: Please provide your 17-digit VIN (Vehicle Identification Number) or equipment details brand, model, year, etc. We will use our database to verify compatibility and assist you in finding the correct part if needed. Q: What should I do if my vehicle or equipment matches the year, make, model, and engine code in the product description, but there is no matching part number? A: Please share your 17-digit VIN or equipment details, along with the part number you are interested in, via live chat or message. We will check our database and confirm whether the part is compatible with your vehicle or equipment as soon as possible. A: Yes, we often sell individual parts from kits separately. If you cannot find the specific part in our store, please send us your vehicle or equipment model and the list of parts you need. We will provide you with relevant links or options. We will work diligently to resolve the issue for you. We apologize for the inconvenience. We have several warehouses in the United States. Not less than 30 days. We greatly appreciate your. Please do NOT leave negative or neutral feedback without any contact. It’s very important to us, Thanks a lot!

]]> https://myjohndeereexcavator.com/h1xa-breaker-hammer-seal-kit-for-kubota-caterpillar-komatsu-john-deere-excavator-2/feed/ 0